HobbyKing
TURNIGY NANO-TECH 6000MAH 6S 25~50C LIPO PACK
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance! Turnigy Nano-Tech High discharge batteries & deliver full capacity as well as being the best value batteries in the hobby market today!Spec.Capacity: 6000mAhVoltage: 6S1P / 6Cell / 22.2VDischarge: 25C Constant / 50C BurstWeight: 908g (including wire, plug & case)Dimensions: 167x49x55mmBalance Plug: JST-XHDischarge Plug: 4mm Bullet-connectorSuited to the following models: MIKADO LOGO500/500SE, ALIGN T-REX600 * The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly. Advantages over traditional Lipo batteries.Power density reaches 7.5 kw/kg.Less Voltage sag during high rate discharge, giving more power under load.Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.Greater thermal control, pack usually d,
5 Reviews
HobbyKing
HOBBYKING 928BB SERVO 2.0KG/ 9G/ 0.13SEC
Model | HK-CS928BB |
Operating Voltage | 4.8V / 6.0V |
Operating Current | 200mA / 240mA |
Stall Torque | 1.8kg.cm / 2.0kg.cm |
Dead Band | ≤5uSec |
Ball bearing | MR85 |
Gear | Plastic |
Connector wire | 215mm |
Operating Temperature Range | -20J+60J |
Operating Speed:, 0.14sec.60º/ 0.13sec.60º, Size:, 22.5X11.5X24.6mm(0.88"x0.45"x0.96"), Weight:9g, Operating Travel:, 40º/one side pulse traveling 400us, Potentiometer:, 2 slider/Direct Drive,
HobbyKing 928BB Servo 2.0kg/ 9g/ 0.13sec5 Reviews
HobbyKing
DIGITAL METAL GEAR SERVO 16G/4.6KG/.16SEC
Model | HD-2213MG |
Voltage | 4.5v~6v |
Speed | 0.16sec @ 6.0v |
Torque | 4.6kg.cm @ 6.0v |
Bearings | 1BB |
Gears | Metal |
Weight | 15.8g |
Size | 22.8x12x29.4mm |
5 Reviews
HobbyKing
TURNIGY NANO-TECH 1800MAH 3S 25~50C LIPO PACK
Capacity | 1800mAh |
Dimensions | 115x35x21mm |
Balance Plug | JST-XH |
Discharge Plug | XT60 |
Voltage:, 3S1P / 3 Cell / 11.1V, Discharge:, 25C Constant / 50C Burst, Weight:, 161g (including wire, plug & case), Suited to the following models:, ALIGN T-REX450, E-flite Blade 450 3D/400 3D, BEAM E4, MSH Protos Mini, Furion 450, ThunderTiger E325/Mini Titan SE, Caliber 450V.,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
HK EDF64 BRUSHLESS POWER SYSTEM 3500KV & 45A ESC
Size | 64mm |
Weight | 139g |
Dimensions | 100x77mm |
No.Of cells | 4S(14.8V) |
Shaft diameter | 3.0mm |
Output Power | 520w |
Max Current(<60s) | 35A |
Thust | 1100g(38.8oz.) |
Recommended model weight | 600-800g |
Motor:, 2836 Brushless outrunner, Blade type:5,
Boost the power of your stock 64mm jet with this ...5 Reviews
HobbyKing
HK2839 EDF OUTRUNNER 2800KV FOR 70MM
Specs | Kv- |
Dimensions | 64 x 28mm |
Shaft diameter | 4.0mm |
Shaft length | 15mm |
Voltage | 14.8V |
Weight | 95g |
Output Power | 550w |
Max Current(<60s) | 36A |
Thrust | 1200g(42.33oz.) |
Recommended model weight | 800-1200g |
Recommended model fans | 70mm Fans |
Mounting Hole Bolt Circle | 18mm & 20mm |
Mtg. Hole Number & Size | 4 x M2 |
5 Reviews
HobbyKing
TURNIGY 1800A SERVO 8G/1.7KG/.10SEC
Model | TGY-1800A |
Speed | 0.10sec |
Torque | 1.7kg/cm |
Size | 22x11.7x24.3mm |
Voltage:6v, Weight:8g,
Micro analog servo. Precise, jitter free response for small parkflyers ...5 Reviews
HobbyKing
DIGITAL HIGH TORQUE BEARING SERVO 41G/4.1KG/.17SEC
Model | HD-4180BB |
Voltage | 4.5v~6v |
Speed | .17sec |
Torque | 4.1kg/cm |
Bearings | 2BB |
Gears | Plastic |
Weight | 41g |
Size | 41x20x36mm |
5 Reviews
HobbyKing
GWS 8CH DUAL CONV 35MHZ FM RECEIVER
Model | GWRXS001 |
Channels | 8ch |
System | FM (PPM) Dual Conversion |
Voltage | 4.8~7.2v |
Current Drain | 10mA |
Weight | 22g/.78Oz |
Size | 65x25x15.5mm |
Range | 600mtr+ / 2000ft |
Adjacent channel rejection | better than 65dB at ± 10k Hz |
Image rejection | better than 65dB |
Spurious rejection | better than 80dB |
nter modulation | better than 65dB |
Sensitivity : 1,
GWS 8ch Dual Conv 35mhz FM Receiver The compact, lightweight ...5 Reviews
HobbyKing
POLYQUEST 2550MAH 4S 25C LIPOLY (VERSION 2)
Capacity | 2550mAh |
Cell Model | PF 7138110XP |
Voltage | 14.8V |
Charge Current(2C) | 5.0A |
Continous Dis.(25C) | 62.5A |
Dimension(mm) | 136 * 38 * 27 |
Weight | 256g |
http | //www.enerland.com |
http | //www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=8790 |
5 Reviews
HobbyKing
SCM 3213 1750KV BRUSHLESS OUTRUNNER
Battery | 2-3 Lipoly |
Max Eff | 81% |
Max Current | 7 to 11A (over 74% efficiency) |
Int. Resistance | 89mohm |
10v no Load current | .75A |
Dimensions | 25.7 x 26mm |
Shaft | 3mm |
Weight | 45g |
Model Size | up to 300-630g |
Recommended Prop | 9x5 3S / 10x5 2S |
Kv: 1750rpm/v,
Spec.3 Reviews
HobbyKing
D-MG16 METAL GEAR 2.9KG/.08SEC/18.8G
Model | D-MG16 |
Weight | 18.8g |
Torque | 2.9kg @6v |
Speed | .08sec |
Voltage | 4.8 to 6v |
Size | 29 x 11.2 x 29mm |
Gear | Metal |
5 Reviews
HobbyKing
GWS NARO+D 10G DIGITAL SERVO
Model | Naro+D |
Voltage | 4.8v~6.0v |
Speed | .16sec |
Torque | 1.6kg/cm |
Weight | 10g |
Size | 22.2x11.0x24.95mm |
5 Reviews
HobbyKing
TURNIGY NANO-TECH 1800MAH 4S 25~50C LIPO PACK
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!Spec. Capacity: 1800mAhVoltage: 4S1P / 4 Cell / 14.8VDischarge: 25C Constant / 50C BurstWeight: 207g (including wire, plug & case)Dimensions: 117x36x28mmBalance Plug: JST-XHDischarge Plug: XT60 ConnectorSuited to the following models: RAVE450 * The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.Advantages over traditional Lipo batteries;-Power density reaches 7.5 kw/kg.-Less Voltage sag during high rate discharge, giving more power under load.-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.-Greater thermal control, pack usually doesnt exceed 60degC-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.-Higher capacity during heavy disc,
5 Reviews
HobbyKing
NTM PROP DRIVE SERIES 35-36A 1400KV / 550W
Max current | 55A |
Max Power | 550W |
Shaft | 4mm |
Weight | 117g |
ESC | 60A |
Cell count | 3s~4s Lipoly |
Bolt holes | 18.9mm & 25mm |
Suggested Prop | 8x4 ~ 11x5.5 |
Specs:, Model:, NTM Prop Drive 35-36A 1400, Kv:1400rpm/v, Turns:7, Bolt thread:M3, Connection:, 3.5mm Bullet-connector, Prop Tests:, 8x4 - 14.8v - 621W - 42A,
NTM Prop Drive motors are rock-solid performance outrunners with tight ...5 Reviews